BRFQG - SLYDE II
- MSDS: BRFQG
- Manufacturer: UNI KEM CHEMICAL CORP
- Product Name: SLYDE II
- National Stock Number: 9150-00-823-7860
Product Identification
Product ID:SLYDE II
MSDS Date:06/01/1994
FSC:9150
NIIN:00-823-7860
MSDS Number: BRFQG
Responsible Party
HARAHAN, LA 70123
US
Emergency Phone: 504-738-1623
Info Phone: 504-738-1623
Cage: FO798
Contractor
Telephone: 504-835-7608
Cage: 4S446
Ingredients
METHYL CHLOROFORMATE (SARA III)
CAS: 79-22-1
RTECS: FG3675000
Fraction By Weight: 35%
ACGIH TLV: 350 PER MFG
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ISOBUTANE/PROPANE PROPELLANT
Fraction By Weight: 20%
TRICHLOROTRIFLUOROETHANE
CAS: 354-58-5
RTECS: KJ3975000
Fraction By Weight: 37%
ACGIH TLV: 1000 PER MFG
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MFG.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:HEADACHE, DIZZINESS, AND NAUSEA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALAION- REMOVE VICTIM TO FRESH AIR. DO NOT GIVE ANYTHING
BY MOUTH TO AN UNCONSCIOUS PERSON. INGESTION- DO NOT INDUCE
VOMITING, CONTACT PHYSICIAN. EYES- WASH WITH PLENTY OF WATER FOR 15
MINUTES. SKI N- FLUSH WITH WATER.
Fire Fighting
Flash Point:FLAMMABLE
Lower Limits:6.2
Upper Limits:17.2
Extinguishing Media:MECHANICAL FOAM, DRY CHEMICAL, WATER, CO2.
Fire Fighting Procedures:SELF CONTAINED RESPIRATORY EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:MOP, WIPE OR SOAK UP WITH ABSORBENT MATERIAL
USING PROPER PROTECTIVE EQUIPMENT. FOR LARGE SPILLS: FLUSH SPILL TO
GROUND AND LET EVAPORATE.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F.
Other Precautions:AVOID BREATHING VAPORS. USE ADEQUATE VENTILATION.
Exposure Controls
Respiratory Protection:IF CONCENTRATION WILL EXCEED TLV, USE SELF-
CONTAINED BREATHING APPARATUS.
Ventilation:LOCAL EXHAUST RECOMMENDED. MECHANICAL (GENERAL)
RECOMMENDED.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:GOGGLES
Other Protective Equipment:RUBBER APRON TO AVOID WETTING CLOTHES.
Work Hygienic Practices:READ INSTRUCTIONS CAREFULLY BEFORE USING.
Supplemental Safety and Health
PROPELLANT: ISOBUTANE-PROPANE MIXTURE=20%. MR. DENNIS WATSON, DSN
468-4200 STATED THAT NAME OF PROPELLANT IS STATED ON THE CAN.
Chemical Properties
HCC:V3
Evaporation Rate & Reference:1.2, REF=UNK
Solubility in Water:NEGLIGIBLE.
Appearance and Odor:AEROSOL WITH HYDROCARBON ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:OPEN FLAME OR WELDING ARCS
Hazardous Decomposition Products:EXPOSURE TO HIGH TEMPERATURES OR OPEN
FLAME GENERATE HYDROCARBON AND SMALL AMOUTN OF CHLORINE & PHOSGENE.
Disposal
Waste Disposal Methods:DO NOT INCINERATE OR PUNCTURE CAN, WRAP
CONTAINER AND DISPOSE OF IN TRASH COLLECTION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.